Carbon wheel

MCC WS+47MM | 28" clincher

Designed for ultimate performance on hilly courses

Description

The MCC in its original rim brake version answers our desire to develop an ideal wheel set for high performance. Light for fast climbing, stiff for optimal performance, very responsive for fast acceleration and optimized aerodynamics.

In 47mm, the MCC pushes the limits of performance on hilly courses.

Each CORIMA front wheel in rim-brake is delivered with a pair of CORIMA brake pads compatible with standard Shimano® / Sram® brake pad holders.

Please note that if you have Shimano® Direct Mount or Campagnolo® brake shoes, you must order the appropriate CORIMA brake pad holders.

Data

• 28" clincher front
• Profile : 47MM
• Rim width : 26mm
• Axle : Quick release 100mm
• Weight : 630 g
• Carbon weave : 3K
• Carbon Spokes : 12
• Integrated magnet

Shipped with

• Pair of brake pads
• Rim tape
• Protection wheelbag
• Valve extender
• Quick release skewer Light

Tire air pressure

Refer to the table below for the tire pressures in relation to the section marked on the tyre.

Do not remove the tire with any metal tool.

The minimum tire section is 23 mm and the maximum 32 mm.

For comfort and performance we recommend fitting 23 mm section tires on our 22.6 mm wide rims and 25 mm section tires on our 26 mm wide rims.

The original CORIMA braided rim tape is mandatory. If it is damaged it must be the replaced.

CORIMA clincher wheels are not compatible with tubeless conversion kits.

Only tires with inner tubes are acceptable (except latex inner tubes).

Co2 cartridge inflation systems are only allowed if their flow rate is adjustable. Instant inflation cartridges are prohibited with CORIMA wheels.

 If the tire manufacturer indicates a pressure lower than that in the table, use this lower value.